Kitchen refit 1

The previous blog entry did rather spoil the surprise didn't it. The only question that remains is how many more episodes will appear here before it is done.

Let us start with the kitchen floor then, which originally looked like this...

Beneath this, however, was the real horror, vinyl tiles stuck down with an adhesive which leaves a sticky residue on the floor boards beneath.

Scraping and peeling these things up proved very physical (as well as being tough on the knees) but the floor's unevenness across the room made it essential so it had to be done. The horrible sticky residue left behind had to be covered over immediately before it grabbed our feet and then spread to the rest of the house so the job was done section by section then covered immediately with a thin layer of plywood.

This levelled the floor and also formed the base for the flooring we will eventually lay on top, 'Luxury Vinyl' tiles that click together without the use of adhesive.

But of course we can't do that yet. First we must dismantle and remove the existing kitchen units so we can put the new flooring down. And this creates a problem. A kitchen is a workspace which is in use every day. The cooker, for example, sink and refrigerator, will all be in use at some point for each meal we prepare and they cannot easily be moved elsewhere. So this requires a plan. Just like a game of chess there will be a sequence of moves made in the correct order. We decide we must tackle the job in two halves, an imaginary line drawn down the centre of our kitchen, each side being torn apart, upgraded then replaced in the shortest possible time. Simple really. Once we start each section, however, then the clock starts ticking and we must work on, our lives being on hold until that side is done.

So here is the plan for kitchen side one.

Switch off cooker, move it across the room, empty and remove base unit and wall cupboards, move fridge/freezer across the room, clean up, lay flooring, move cooker and fridge back onto new flooring, fit new wall and base cupboards, cut and fit worktops. Job done.

But hold on...we haven't even unpacked the boxes yet.